Did not notice: in the Russian interior, a real “boom” slatted walls, ceilings and partitions? Found out the authors of the projects, what problems they solved with the help of wooden strips. And at the same time said the technical details of choosing the right material.
1. To highlight the fireplace
Where: Dzerzhinsk, Russia
Author: designer Rustem Urazmetova
Besides the decorative function, the slats in this project zoniruya role: they mark the wall at the fireplace. During the repair of used wooden slats under the matte varnish of own carpentry workshop of the owner. And that was a mistake.
Urazmetova Rustem
The fact that the wood was not dried before the end of six months some of the slats broke. They had to be replaced for reliability and to secure the anchors (initially all was installed in the parquet glue).
The Council: “That the wood is not moved with the times, take the heat treated material. Or order the strips of chipboard with laminated wood is even more predictable solution, because natural wood has certain difficulties with the exact coloring,” advises designer Rustem Urazmetova, the author of this project.
MORE ANGLES…
Full photography and plan of the apartment in Dzerzhinsk — the profile of the author of the project Rustem Urazmetova
systematica by lee
2. To save on the alignment of walls
Where: Saint-Petersburg, Russia
Authors: Bureau Systematica by lee
Wooden design on photo made of MDF in veneer or laminate to match the furniture: wall of blades brings together the wardrobes in a single volume. The second purpose of the panels is to mask the irregularities of the wall. As the apartment was repaired under the change, the owner didn’t want to invest in the geometric alignment of the walls.
systematica by lee
The panel ordered as ready-made construction on the local production of LLC “Lux-M”: all it took — is it correct to carry out measurements on final finishing of the premises: that there are no gaps between the floor and ceiling.
MORE PHOTOS…
Entirely flat — shooting, and plan for a portfolio of authors of the project, the design Bureau Systematica by lee
Chernenko Olga / White & Black Design Studio
3. To protect the from scratches
Where: Saint-Petersburg, Russia
Author: designer Olga Chernenko, White & Black Design Studio
In this project, slats of solid oak tinted in brown. This decision was chosen not only for decorative reasons but also to protect the corner. The fact that the wall with the rails, there’s a rotating seat, which can scratch the wall for painting — wall panels of wood damage is harder.
According to Olga Chernenko, the author of the project, it was difficult to find a well-dried pattern and to achieve smooth tone with the toning.
ABOUT THE PROJECT WITH PHOTOS…
Houzz tour: family nest for a family with three sons
Ksenia Demina
4. Align the proportions of the room
Where: Krasnodar, Russia
Author: designer Ksenia Demina
Originally this room was too stretched. To even out the proportions, the designer made part of the floor material to wall (the room seem higher) and have docked with the black strips that flow from the wall to the ceiling. The project uses conventional engineering Board: going to the castle and glue, the wall requires leveling.
“When assembling the main thing is to use the algorithm: first floor laid, then the wall, then we bring the beams in the ceiling. Since wood tends to expand, installation should be carried out in that order”, says Ksenia Demina, the designer of this project.
ABOUT THE INTERIOR…
Houzz tour: Apartment in Krasnodar with the green corridor and rails
Mikhail Novinsky (MNdesign)
5. To do accent wall
Where: panel three 1970 in St. Aviation, Moscow, Russia
Author: Mikhail Novinsky (MNdesign)
It — granary Board of Canada, the salty winds and sea air of the coast. In the world today is fairly common practice to disassemble the old farm building and sell the textured Board for reuse. Barn to Board without a problem “lived” in the kitchen, after installation it is treated with a hydrophobic impregnation.
What is the complexity of: Board mounted without any underlay or sheathing, directly on the leveled surface — it was important to make the fasteners as seamlessly as possible. Because the screws were wrapped in either end of the Board, or in existing holes from the nails (Board-that had lived, the holes of the nails were also).
“Barn Board is smooth and mottled, with traces of old paint — it is important not to overdo it with visuals. Problems in the installation material does not create, but you better warn the desire of the workers to make a “good cause” (carefully planed into a regular Board). And yet — not saying this is material from the old barn at the price of natural flooring,” — said the project author Mikhail Novinsky (MNdesign).
THE PROJECT AS A WHOLE…
Consider the brutal loft in prefabricated high-rises — shooting in the Studio profile
Pavel Burmakin / SumburBuro
6. To add brutality, but gently
Where: LCD “Master house”, Russia
Authors: Pavel Burmakin, SumburBuro
I think we like the material and the task. But no — in the project in the photo no salvana Board. This Wallpaper with picture boards brands PIET HEIN: the manufacturer offers different textures and colors plank wall.
“Walls with boards is a pretty common technique. And many times we used the Board in kind. Wallpaper the implementation of this idea is simpler, and in many cases in the interior, they look better than the natural Board”, explains the author of the project of the architect Pavel Burmakin.
Alexander Nikulin
7. Retreating, but not quite
Where: Yekaterinburg, Russia
Authors: TrioDesign
In the Studio, we needed to separate the bedroom area, but not lose the sense of “unified” space. For example, the curtains in the same role would cut off part of the room and blocked the light. And through the rack “ate” would be 30-40 cm of space. With rails the same space is perceived are one.
Design custom made in the workshop Frugg of timber 6×6 cm For installation made special boxes on the ceiling and the floor (closed ceiling cornice and floor plinth).
“The main thing — accurate measurements. In our case, the partition is very close to the bed. Required to make the reserve not just the length of the mattress, but also take into account the thickness of the skirting boards at the base of the future walls. For reliability, we first installed a box of GCR to which will be attached design, and then ordered yourself Reiki” — explains Alexander Nikulin, the designer of this project from TrioDesign.
MORE PHOTOS…
The Studio apartment in the residential complex “Dream” — a complete survey in the profile of the designers
Studio “Atamanenko, Architecture and Interiors”
8. To add dynamics
Where: Moscow, Russia
Authors: Studio “Atamanenko, Architecture and Interiors”
In this project the wooden slats in several places: on the ceiling, kitchen fronts and apron (next photo). The subject develops the lamp of parallel wooden bars.
Wooden design panels made of two types of MDF. Base — painted MDF, pattern — veneered HDF. The door chest is made of MDF, painted as a base, rack and pinion drawing from solid oak. Panels custom DF Interiors (LLC “Deflore groups”); to the wall mounted on the glue. The base should be smooth, painted or primed.
Studio “Atamanenko, Architecture and Interiors”
On the photo: the wooden slats of the facade “continue” on the panel — kitchen apron. The decision looks a whole with the doors of the cupboard underneath. For opening the doors of the wardrobe were performed milling — simulation integrated handles. Shelves for decor mounted using special anchors long (shelf supports hidden)
“The most difficult to manufacture such a panel — the calculations of the designer. The lower the number the headset is assembled from frames of a certain width is required to take into account the size of the kitchen cabinets and make the distance between the wooden elements so as to achieve the effect of a single panel with the transition to the wall.”
SHOT ENTIRELY…
All the angles of this kitchen in the profile of the design Studio “Atamanenko, Architecture and Interiors”
Design Studio Marina Kutuzova Detail
The paint on the wall Litlle Green
9. Decorate the wall… drywall
Where: Svetlogorsk, Russia
Authors: the design Studio of Marina Kutuzova Detail
According to the survey think that it is too wooden bars, but no — we are gypsum Board, is mounted in a bizarre way. According to Marina Kutuzova, the author of the project, it is very easy to implement solution, with the installation copes builders. “A similar effect can be achieved using mouldings from polyurethane rectangular section — it will give not as large, but still interesting terrain”.
MORE PHOTOS…
See the apartment in Svetlogorsk in the profile of the author of the project, the designer Marina Kutuzova
Kerimov Architects
10. To visually expand the Cabinet
Where: Moscow, Russia
Authors: Shamsudin Kerimov Studio Architects
In this project we see an unusual use of strips of MDF: they are pasted on the pre-mounted mirror, and then covered with the same decorative plaster that wall. “If you want to repeat such a decision, the installation should be conducted on the earliest stages of rough work,” explains Shamsudin Kerimov, the author of this interior.
MORE PHOTOS…
See a full survey of the project on the Rogozhskoe shaft in the portfolio of the Studio Shamsudin Kerimov Architects
Daria Melnikova
11. To balance “brick”
Where: Krasnogorsk, Russia
Authors: Daria Melnikova
Living area — the only place in the decoration of the walls of used brick. To two walls did not look too “litova” monotonous surface broke a wooden insert.
The construction of beams assembled in place: first, the wall has recorded four horizontal bars, then between them breaking down. Please note: this is not a pine, and larch under oil (ton “nut”).
ABOUT THE PROJECT WITH PHOTOS…
Guest: Apartment with internal window to the designer
Alexei Ivanov and Pavel Gerasimov|Geometrium design
12. Zone the hallway and hide a cat house
Where: Moscow, Russia
Authors: Geometrium design
In the interior slats are made of MDF in veneer of oak — they visually separated the hall from the adjoining kitchen. Shade of veneer is chosen in the color of the wooden flooring. And the width of the partition defined by the table (house cat): freestanding, it is very evident, and even serves as an additional fastening for the partition. Because first stuck the ceiling, then secured the Cabinet floor and vertical posts attached to the ceiling and pedestal.
“If you want to repeat our solution, consider how to further fix the rod at a sufficient height of ceiling, they tend to SAG. We were saved by the dresser and continued slats on the ceiling,” — explains Tatiana Plotnikova, lead designer of the project.
MORE PHOTOS…
Angle, where is seen the entrance to the Cabinet and other images from the project, see the portfolio of the Studio Geometrium design
I. D. interior design
13. Replace tile
Where: Moscow, Russia
Authors: I. D. Studio interior design
This design was assembled from planks of teak — a very durable and durable material, resistant to moisture (especially important, since wall teak located directly in the bath area). The contractor was the company, which is engaged in yacht building.
“Between boards must leave an expansion gap because wood — a living material, and from the effects of moisture and temperature the movement of the material is inevitable. It is important that the cracks have been carefully sealed with an elastic composition, which will expand and shrink with the wood, preventing the penetration of water in the cracks,” advises Daria Shirokova, the designer of this project.
MORE PHOTOS…
Full shot of the apartment in Moscow — in the Studio profile I. D. interior design
ON THE SUBJECT…
- The article “Mikrotrend: How to set the saw cut and cuts of wood in the interior”
- Photo of the wooden walls in the projects of designers from around the world at Houzz
